Need help?Do you have a question about the Sanwa YX-361TR and is the answer not in the manual?
General| Type | Analog Multimeter |
|---|---|
| Continuity Check | Yes |
| hFE | Yes |
| Battery Check Range | 1.5V / 9V |
| Resistance Ranges | 2kΩ/20kΩ/200kΩ/2MΩ |
| Power Source | 9V Battery |
Features include automatic polarity, continuity check LED, and battery test.
Includes a load for practical battery tests, with a color-coded GOOD-BAD scale.
Features insulated guards on terminals and plugs for enhanced operator safety.
Circuit design considers safety with a high-performance fuse and protection diode.
Covers DCV from 0.1V to 1000V and DCmA from 50µA to 0.25A.
Measures ACV from 2.5V to 1000V with specified frequency response.
Highlights essential warnings to prevent personal injury during operation.
Ensures indicator alignment and correct range selection before use.
Explains correct parallel (voltage) and series (current) connection methods.
Covers DCV measurement purpose, ranges, terminals, and scale reading.
Enables polarity-sensitive measurements in digital and op-amp circuits.
Details DCmA measurement purpose, ranges, terminals, and scale reading.
Covers ACV measurement purpose, ranges, terminals, and scale reading.
Covers resistance measurement purpose, ranges, terminals, and scale reading.
Measures the DC current amplification factor (hFE) of transistors.
Explains the automatic polarity detection and NULL meter capability.
Lists essential warnings for safe operation, including circuit capacity and fuse usage.
Covers test pin safety, high voltage risks, and operating with covers removed.
Ensures proper setup, including zeroing, NULL range check, and lead connection.
To Next Page
