– 34 –
PIN IC specification Assignment I O Explanation
51 P72/INT2/T0IN CEC output OUT CEC output
52 P73/INT3/T0IN Rcin IN Remote control signal input
53 RES RESET in IN CPU Reset input RESET : Low (and for on-board write)
54 XT1 Xin IN 32.678KHz X’tal input (for clock timer)
55 XT2 Xout OUT 32.678KHz X’tal output (for clock timer)
56 VSS1 Vss IN GND (0Vdc)
57 CF1/AN12 Xti IN Main clock input (8MHz ceramic oscillator)
58 CF2/AN13 Xto OUT Main clock output (8MHz ceramic oscillator)
59 VDD1 Power IN IN VDD1 (5Vdc±10%
60 AN0 Key in IN Panel switch input
61 AN1 Reserve IN GND
62 P82 PANEL READY IN Panel Ready (for PDP) OK : High NG : Low only PDP
63 P10 VS-ON OUT VS-ON for PDP) ON : High OFF : Low only PDP model
64 P11 REG SW1 OUT REG SW1 (ON : Low OFF : High)
To Next Page
Loading...
