Sanyo ABC-VW24A - Unit Operation Controls; Safety Mechanism Functionality

E-4
Confirm the accessories.
(The filter has been placed within the device during
shipping. Remove the plastic protector and replace the
filter into the unit. Refer to page E-5)
Filter
Date label
フィルター 
交換目安
右の色と同
程
度
に汚れた時は、
交
換
してください。
右の色にならなくても、においが
気になる時は交
換
してください。
汚れ色目安
Remove the front cover before operating.
<Removing the Front Cover>
Release
Button
Front Cover
Release Button
q Press the release buttons
(both sides) at the bottom of
the unit, w pull the front
cover away from the unit,
and e lift.
q
q
w
e
Filter Reset Button
Press this button after
replacing the filter.
Select Brightness Button
Electrolyzed Water Button
Filter Replacement Lamp (Red)
Tu rns on when the filter needs to be replaced.
Add Water Lamp (Red)
Tu rns on when the water needs to be replenished.
Tu rns on when the device needs to be cleaned.
Air Flow Indicator
(Green)
Power On/Off Button
Fan Speed Button
Off Timer Button
Timer Indicator
(Green)
Automatic Operation Lamp (Green)
Electrolyzed Water Lamp (Green)
Tu rns on when the electrolyzed water function is operating.
Power Mist
Button
Power Mist Lamp
(Green)
Turns on when the power mist is
operating.
Operating Unit
Safety Mechanism
■When this unit tips over, the device is
automatically stopped.
¡Stand the device correctly and press the Power
On/Off button to restart.
¡If water spills from the electrolyzed water unit and
tank, ensure that the spill is cleaned and dry
completely before operating the unit.
¡The unit cannot be operated while tilted.
¡The memory is cleared.
English
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ4