Sanyo C14PL60 - Picture Adjustment

[
Memory
)
This function lets You store the settings (for colour, brightness, contrast, sharpness! sound
volume) in the memory for both p=ture and sound-, and these setting levels can be
recalled by pressing the NORMALIZATION @ button of the remote control transmitter.
To store the picture and sound settings
met’=
❑ Set the pictureand sound to the desirable levels.~ ~ ~~”ND
$
❑ Press the MEMORY/PRESETO ~ button while the control function display is still
visible on the screen.
Note:The control settings will not be saved if the MEMORY
button is pressedafter the controlfunctiondisplayhas left
=
the screen,
(
Normalization
)
Press the NORMALIZATION button @. And the colour,
brightness, contrast, sharpness and sound volume settings
which you stored using the MEMORY button are recalled.
&
[
Picture Adjustment
1
I Press the FUNCTION@ button repeatedly to select the following functions.
Each time the FUNCTION button is pressed, function choice will change as follows;
@!&&@@4-
Colour Intensity
Brightness
+
Contrast
T
(OperativeforNTSC4.43
I
kii
TINT
and NTSCsignalonly)- ll[l[lll[ll--.-
U“w”
Display off
Fine tuning
(OperativeforTV modeonly)
Increase or decrease the level of the chosenfunctionby pressingthe LEVEL@
+
Tint
MSHARPNESS
11111111111----
I
I
Sharpness
+ or – button.
-7-