When you replace a memory IC (IC802), it is neces-
sary to initialise the IC as follows.
A. Initialisation of Memory IC
1. When you press and hold the Recall button on the RC
transmitter and then press the Prog + button on the TV
set, the following picture will appear on the screen.
2. Confirm SET number of all items is "0" by pressing the
Function button.
3. If it is not "0", change to "0" by the Level (+/-) button.
(Changing the SET number, automatically memo-
rised.)
4. Press the Recall button, to return the normal TV mode.
For more information, please refer to "special functions"
on the instruction manual.
MEMORY IC REPLACEMENT (Important Notice)
To Next Page
Loading...
Need help?
General
