English - 11 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you 1.
to view all the channels that you subscribe to. For more
information, see “Conditional Access” section.
Side USB input . 2.
Note: Codec update cannot be performed.
Side HDMI Input is for connecting a device that has an 3.
HDMI socket.
Headphone jack is used for connecting an external 4.
headphone to the system. Connect to the HEADPHONE
jack to listen to the TV from headphones.
Video Input is used for connecting video signals of external 5.
devices.Connect the video cable between the VIDEO IN
socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of 6.
external devices. Connect the audio cable between the
AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks
on your device. Note: If you connect a device to the TV via
the VIDEO INPUT, you should also connect your device with
an audio cable to the AUDIO INPUTS of the TV to enable
audio.
S-Video Input is used for connecting an S-Video signal 7.
(e.g. from a camcorder or VCR). For using S-VIDEO input;
connect the video cable between the S-VIDEO input on the
TV and the S-Video output on your device. Connect the audio cable between the AUDIO
INPUTS (indicated with number 6 in the illustration) on the TV and the audio jacks on your
device .
Standby switch is used for turning the TV on or off8. .
To Next Page
Loading...
