-11-
Service Adjustments with Replacing Memory IC(IC802)
1) To enter to the Service Mode
1. Press and hold the Volume + button on the front of TV set and press the Menu button on the Remote Control.
3) Exit from the Service Mode
Press the Menu button or turn off the TV set by using the mains switch.
Adjustment Data
Item No.
SERVICE
001 FB1B 0.92
ZOOM 50HZ
020 V.LINEARITY 39
00111010 00000000
01010000 10001100
10000001 00001010
00011010 00001010
Example
Display for [V.Linearity] Vertical Linearity adjustment
2. Press the Programme up / down button to select the mode required. Then press the Volume + button to
adjust.
To Next Page
Loading...
