Option Setting
After replacing the Memory IC (IC802)
The memory IC (IC802), stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be programmed to the following settings and “ SERVICE ADJUSTMENT”
on pages 15 to 16.
1) To enter to the Option Mode
Press and hold the MENU on the remote control and Programme down button (CH) on the front panel of
the TV. The option window will appear on the screen.
Option Mode
2) To set the Option Mode
Select the desired option item by pressing the Programme down or up button.
To switch the option mode, use the Level up or down button.
The data which is set in the option mode is stored into the memory IC automatically.
The following table shows the available option items and default setting mode.
Option Mode Mode Description & Note
PLUG & PLAY ON or OFF Plug & Play mode, default “ON”
WELCOME TEXT ON or OFF Display message when first set up, default “OFF”
AUTO VOLUME ON or OFF Auto volume, default “OFF”
TEXT NO SIGNAL ON or OFF When no received signal, execution, default “ON”
AFC ON or OFF Automatic Frequency Control (AFC) available, default “ON”
3) Exit from the Service Mode
Press the Menu button or turn off the TV set by using the mains switch.
To Next Page
Loading...
Need help?
General
