-14-
Following table shows the initial values which have been stored in the CPU ROM, and items for the service adjustments.
Service mode adjustments table in CPU ROM
Service Adjustments with Replacing Memory IC(IC802)
DATA INITIAL
No. ITEM RANGE SETUP DESCRIPTION
DATA
223 SVMA 0 - 1 1 Scavem Output Signal
224 SVM 00 ns 00 Delay of RGB output to SVM output
25 ns
50 ns
75 ns
100 ns
125 ns
150 ns
175 ns
225 VMA Off 2 Amplitude of SVM output
0.8 Vp-p
1.2 Vp-p
1.8 Vp-p
226 SMD Off 1 Scan Velocity Modulation Mode
Video
TXT/OSD
Video/OSD
227 SVM-OSD-PW 0 - 3 3 OSD Scavem Pulse Width
228 SMD-OSD-TM 0 -7 2 OSD Scavem Time
229 PeakFreq PAL443 0 - 3 3 No Function. Peaking Centre Frequency
230 PeakFreqAV 0 -3 3 Peaking Centre Frequency Default
231 SoftClipevel 0% above PWL 000 Soft Cliping Level
5% above PWL
10% above PWL
Off
232 BLUE BACK MUTE 0=Off 0 Blue Back Mute
1=Black Back
2=Blue Back
233 TXT MAX 0 - 15 15 OSD RGB Brightness for TEXT BRIGHTNESS MAX
234 TXT CEN 0 - 15 8 OSD RGB Brightness for TEXT BRIGHTNESS
CENTER
235 TXT MIN 0 - 15 0 OSD RGB Brightness for TEXT BRIGHTNESS MIN
236 Blackstretch 0 - 1 1 Black Stretch Functionality
(0=Disable, 1=Enable)
237 Bluestretch 0 - 1 000 Blue Stretch Functionality
(0=Disable, 1=Enable)
238 Whitestretch 0 - 3 3 White Stretch Setting
(0=cold, 1=normal, 2=warm, 3=)
239 SoftClipper 0 - 3 000 Set Soft Clipper
240 PeakRatio0VShot 0 - 3 3 Set Peaking Ratio
241 Tint Def 0 - 63 32 Default Tint Value
242 Tint NT 0 - 255 0
243 OSO On/Off 1 Switch-Off in Vertical Overscan
244 FSL Noise Detector 60% 000 Forced Slicing Level for Vertical sync
245 HP2 0 - 1 000 Synchronisation of OSD/TEXT display
(0=Phi 1, 1=Phi 2)
246 MR VOL L 0 - 255 52 Master Volume Lower 8 bits
247 MR VOL H 0 - 7 4 Master Volume Upper 3 bits
248 EQU_SUB_BASS 0 - 63 31 Equalizer Adjustment for Bass
249 EQU_SUB_TREBLE 0 - 63 38 Equalizer Adjustment for Treble
250 OP AUDIO CONFIG 0 - 2 2 0=Mono only functions. 1=No Audio SSD avai-
lable Audio SSD functions available but no
stereo decoder. 2=Full Audio SSD
253 OP MONOURAL 0 - 1 0 0=AV Stereo, 1=Mono.
254 OP BASS EXP 0 - 1 1 0=No Bass Exp./Woofer, 1=with Bass Exp./Woofer
255 OP WOOFER 0 - 1 0 Activated/Deactivated Bass Expander Feature
Menu. (0=Bass Expander, 1=Woofer)
DATA INITIAL
No. ITEM RANGE SETUP DESCRIPTION
DATA
177 CN 43 0 - 255 250 Wide Mode 4:3 Offset
178 SH RF PN 0 - 255 10 RF PAL/NTSC Offset
179 SH AV 0 - 255 10 AV PAL/NTSC Offset
180 SH DVD 0 - 255 10 DVD PAL/NTSC Offset
181 SH S 0 - 255 10 Secam Offset
182 CL RF P 0 - 255 5 RF PAL/NTSC Offset
183 CL AVP 0 - 255 5 AV PAL Offset
184 CL N 0 - 255 0 NTSC RF/Video Offset
185 CL S 0 - 255 0 Secam Offset
186 CL DVD 0 - 255 7 DVD PAL/NTSC Offset
187 CL 43 0 - 255 0 Wide Mode 4:3 Offset
188 PV-BR-DY 0 - 63 31 Preset Video Dynamic Brightness
189 PV-CT-DY 0 - 63 63 Preset Video Dynamic Contrast
190 PV-CL-DY 0 - 63 36 Preset Video Dynamic Colour
191 PV-SH-DY 0 - 63 54 Preset Video Dynamic Sharpness
192 PV-BR-ST 0 - 63 32 Preset Video Standard Brightness
193 PV-CT-ST 0 - 63 50 Preset Video Standard Contrast
194 PV-CL-ST 0 - 63 32 Preset Video Standard Colour
195 PV-SH-ST 0 - 63 35 Preset Video Standard Sharpness
196 PV-BR-EC 0 - 63 31 Preset Video Eco Brightness
197 PV-CT-EC 0 - 63 40 Preset Video Eco Contrast
198 PV-CL-EC 0 - 63 26 Preset Video Eco Colour
199 PV-SH-EC 0 - 63 31 Preset Video Eco Sharpness
200 PV-BR-GA 0 - 63 36 Preset Video Game Brightness
201 PV-CT-GA 0 - 63 25 Preset Video Game Contrast
202 PV-CL-GA 0 - 63 36 Preset Video Game Colour
203 PV-SH-GA 0 - 63 31 Preset Video Game Sharpness
204 CLO S 0 - 1 0
205 DTR S 0 - 1 0
206 Y-SECAM 0 - 15 11 Y-Delay Adjusment for SECAM
207 YNTSC 0 - 15 6 Y-Delay Adjusment for NTSC
208 YPAL 0 - 15 4 Y-Delay Adjustment for PAL
209 YAV 0 - 15 4 Y-Delay Adjustment for AV
211 YSVHS 0 - 15 4 Y-Delay Adjustment for S-VHS
212 ACL On/Off 000 Automatic Colour Limiting
213 MUS Japan 1 NTSC Matrix
214 PWL CONTROL On/Off 0 Peak White Limiting On/Off Control
215 PWL 0 - 15 8 Peak White Limiting DAC Control
216 CB On/Off 1 Chroma Bandpass Centre Freq.
217 CB RF P On/Off 0 CB Setting for RF PAL
218 CB AV N On/Off 0 CB Setting for AV NTSC
219 CBS On/Off 1 Control Sequence Beam Current Limiting
220 BSD On/Off 1 Black Stretch Depth
221 BPS On/Off 000 Bypass Chroma Base-Band
222 FCO On/Off 000 Forced Colour On
To Next Page
Loading...
