Sanyo CP21EF1 - Entering Service Mode

-9-
Service Adjustments with Replacing Memory IC(IC801)
MENU
ADDRESS
DRV R 64 B 64
SI. 11100101S2.11110001
DATA
23
ADDRESS
V-SCO
SI. 11100101S2.11110001
DATA
12
06
ADDRESS
RF AGC
SI. 11100101S2.11110001
DATA
30
01
[Entering to Service Mode]
1. Press and hold the MENU button on the Remote Control and press the VOLUME (+) button on the TV set.
Following setting items appears on the screen.
Display for [V-SCO] V-S Correction adjustment
Read Status
Item No.
Item
Data value
Display for [RF AGC] RF AGC adjustment
Read Status
Item No.
Item
Data value
Data value for Red
Display for [DRV] White balance adjustment
Read Status
Item No.
Item
Data value for Blue
To return to normal TV mode, press the MENU button on the TV set or the remote control handset.
2. Select item by pressing the TIMER (Item No. UP) or SOUND MUTE (Item No. DOWN) button on the remote control
handset.
3. Adjust data value by pressing the VOLUME + or VOLUME - button on the remote control handset.
Example
MENU
MENU
0102030405......96...
...9695949392......01
MENU
TV/AV
- +
CH
TIMER
x
07
24
SM_21-BA5V(AC6-A)AUS 7/25/06 1:20 PM Page 9