Sanyo DP32647 - Service Adjustments

1
4 5 6
7 8
0
9
2 3
POWER
INPUT
INFO
RECALL
MENU
CAPTION EXIT
VOL
RESET AUDIO PIX SHAPE
CH
ENTER
1-- MUTE
SLEEP
— 3 —
SERVICE ADJUSTMENTS
Volume + / –:
Adjust Service Menu
Channel  :
Select Item
GENERAL
This set has an On-screen Service Menu system included in
the CPU that allows remote operation for most of the ser-
vice adjustments.
ON-SCREEN SERVICE MENU SYSTEM
1. Enter the Service Menu:
• Turn off the receiver and disconnect the AC power
supply.
• While pressing the Volume (–) button on the televi-
sion, reconnect the AC power supply. The Service
Menu will now appear. The remote can now be used
to make adjustments. See Figure 1 below.
2. Service Adjustments:
• Press the Channel  or  key to select the desired
service menu item you want to adjust. See page 4
for the On-screen Service Menu.
• Use the Volume + or – key to adjust the data.
The + or – keys will increase or decrease the data
sequentially.
3. Exit from the Service Menu:
• Press the MENU key to turn off the Service Menu
display.
Figure 1. Service Menu Display
HEX DATA
V e r 0 5 1
0 8 6 V O L
3 0
ITEM NO.
TITLE
Volume – : Enter Service Menu
Menu:
Exit Service Menu