— 7 —
BOARD AND SPEAKER REMOVAL
1: Main Board Removal
Remove 5 screws (C:3X6) to take the main board
off.
2: Power Unit Removal
Remove 6 screws (C:3X6) to take the power unit off.
3: Control Board Removal
Remove 2 screws (A:4X14) to take the control board
off.
4: Speakers Removal
Remove 4 screws (A:4X14) to remove each speaker.
LCD panel removal Removal
1. Disonnect the lead wires from LCD panel, speakers, and control board.
2. Remove 7 screws (A:4X14) to take the mounting frames with chassis plate,
power unit, and main board off.
3. Lift the LCD panel from the front cabinet.
To Next Page
Loading...
