Sanyo DP42740 - ON-SCREEN MENU OPERATION; CHANNEL SETTING

– 10 –
C
C
Mounting Frame
Chassis Frame
PANEL MODULE REMOVAL
1. Remove the 2 screws (C:4x8) from the Mounting Frames to take the Chassis Frame off.
2. Remove the 4 screws (C:4x8) from the Mounting Frames to take the panel moduel off.
C
C
Mounting Frame
C
C
CAUTION:
This PDP TV uses several different kinds of screws. Using the correct screw is necessary to prevent damage.
Lead wires must be redressed to their previous locations after servicing. The Earth sheet and gasket are
provided to prevent interference to other radio and television receivers. The Earth sheet and gasket should
be returned to its previous position after servicing.