Need help?Do you have a question about the Sanyo DP42840 and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60Hz |
| Contrast Ratio | 3000:1 |
| Brightness | 450 cd/m² |
| Viewing Angle | 178 degrees |
| Response Time | 8 ms |
| Power Consumption | 150W |
| Resolution | 1920 x 1080 (1080p) |
| Audio Output | 10W |
| Inputs | HDMI, Component, Composite |
Install two AAA batteries in the remote control for operation.
Connect antenna or cable service to the HDTV's ANT terminal using a 75 OHM coaxial cable.
Details the function of each key on the remote control, including power, navigation, and special feature keys.
Configure channel search, scan memory, and input settings within the on-screen menu.
To Next Page
