Sanyo DP50747 - RIGHT SIDE PANEL (VIEWED FROM FRONT)

— 8 —
MECHANICAL DISASSEMBLY (CONT.)
BOARD REMOVAL
H
H
I I
A
H
H
H
H
H
H HH
H
H
H
H
A
J
1: Main Board Removal
Remove 5 screws (H:3X6) to take the main board
off.
2: Sub-Power and Filter Board Removal
Remove 12 screws (H:3X6, 9pcs, I:3X8, 2pcs,
J:4X10, 1pc) to take the sub-power and filter
board off.
3: Control Board Removal
Remove 2 screws (A:4X14) to take the control
board off.
FILTER GLASS AND SPEAKER REMOVAL
2. Remove 10 screws (4X14) to take the panel
module with the panel holders (Mounting
Brackets) and boards off.
1. Disconnect the following socket connections.
Control Board ~ Main Board: K8FRA
Speakers ~Main Board: KSP
KSP
K8FRA