— 6 —
MECHANICAL DISASSEMBLY
BACK CABINET REMOVAL
Remove 43 screws to take the cabinet back off.
(A:4X14, 22pcs; B:6X18, 4pcs; C:4X8,17pcs)
STAND REMOVAL
Position TV face down on a padded or cushioned surface to protect the screen and finish.
Remove 4 screws (6X18) and remove stand.
ATTENTION
■ This PDP TV uses several different kinds of screws. Using the correct screw is required
to prevent damage.
■ The gasket is provided to prevent interference to other radio and television receivers.
The gasket must be returned to its previous position after servicing.
■ Lead wires must be redressed to previous positions after servicing.
To Next Page
Loading...
