Sanyo DP50747 - HDTV BACK PANEL (Continued); Component Video Input (VIDEO2 or VIDEO3); S-Video Input (VIDEO1)

— 10 —
2. Remove 4 screws (4X8) to take each mounting block off.
1. Disconnect the following socket connections;
PDP Module Power Unit ~ Main Board: CN8003, CN8004
PDP Module Power Unit ~ Sub-power and Filter Board: CN8001
PDP Module Logic Unit ~ Main Board: K5LV
2. Remove 8 screws (4X14) from the Mounting Brackets and take the panel
module off.
MECHANICAL DISASSEMBLY (CONT.)
PANEL MODULE REMOVAL
CN8004
CN8001
CN8003
K5LV