EasyManua.ls Logo

Sanyo DS19310 - Page 35

Sanyo DS19310
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DS19310
Model:
COLOR TELEVISION
AS
FILE NO.
G8EEM, PRODUCT CODE 111355483
REFERENCE No. SM5110224-01
Notice
CORRECTION
SERVICE FLASH
PRODUCTION CHANGE
ADD INFORMATION
Please add this notice to the Service Manual listed below.
REVISION 1
Category:
U.S.A. / CANADA
Destination:
AUGUST / 14 / 2001
Date:
19310-01
Effective from: Chassis No.
SM5110224
REF: No.
NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual.
If the Service Manual Chassis No. does not match the unit’s, additional Service Literature is
required. This chassis is similar to Chassis No. 19310-00. Only the Difference Service
Information is given in this manual. For detailed Service Information, refer to the Original Service
Manual and Notices for Chassis No. 19310-00 used in Model DS19310 (SM5110224).
INITIAL BUS DATA SETUP
Note: When IC802 (EEPROM) is replaced, the Service Menu No. 001 HP (H Phase), No. 013 TDS (Trap & D SW), No. 014 AF
(Auto Flesh), No. 024 AG (AFC Gain), No. 026 SCO (Sub-Color), No. 027 STI (Sub-Tint), and No. 031 HR (OSD Display H-Position)
should be set up for proper TV operation before attempting the service adjustments.
1. Disconnect the AC power cord (AC 120V line).
2. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
3. Select No. 001 HP (H Phase) with or key. Adjust the data with + or – key for 14.
4. Select No. 013 TDS (Trap & D SW) with or key. Adjust the data with + or – key for 1.
5. Select No. 014 AF (Auto Flesh) with or key. Adjust the data with + or – key for 1.
6. Select No. 024 AG (AFC Gain), with or key. Adjust the data with + or – key for 0.
7. Select No. 026 SCO (Sub Color) with or key. Adjust the data with + or – key for 7.
8. Select No. 027 STI (Sub Tint) with or key. Adjust the data with + or – key for 20.
9. Select No. 031 HR (OSD Display H-Position) with or key. Adjust the data with + or – key for 28.
10. Press the MENU key to turn off the Service Menu display.
1. IN THE SERVICE ADJUSTMENTS LIST
PAGE 3

Other manuals for Sanyo DS19310

Related product manuals