SERVICE ADJUSTMENTS (Continued)
— 5 —
PROGRAM CODES
The microprossesor used in this model is a multi-purpose
type and is used in several different models. To ensure
proper operation and the correct features for your particu-
lar model, the Program Codes must be correct.
Note 1. Option Data 1 (NO. 29 OPT) should be decimal 36
(00100100 binary). See page 3 INITIAL DATA SETUP, step 9,
for set up procedure. If this program code is wrong the TV
will not operate properly.
Note 2. Option Data 2 (NO. 30 OPT 2) should be decimal 72
(01001000 binary). See page 3 INITIAL DATA SETUP, step
10, for set up procedure. If this program code is wrong the
TV will not operate properly.
*1.When the Monitor option is used, the CPU regards the
Video Input option as Yes and the PIP option as None.
*2.When the None Video Input option is used, the CPU
regards the PIP option as None.
*3.When the Mono option is used, the CPU regards the
Surround option as None.
*4.When the Initial Channel option is used the Initial
Channel, Favorite Channel, Parental Control and XDS
(Extended Data Service) features are available.
Note 3. Red/Blue Drive Adjustments in Service Menu NO.
40 DRV: Adjust Red and Blue Drive Levels alternately with
1, 3, 7, and 9 keys on the remote control. (See figure 2.) The
Drive Level adjustment data will be written in the Service
Menu No. 11 and 12 automatically.
1
2
3
4 5 6
7 98
RB(–)
RB(+)
BB(–)
BB(+)
(N/A)
GB(–)
(N/A)
GB(+)
(N/A)
FOR RED BIAS ADJUSTMENT
FOR BLUE BIAS ADJUSTMENT
FOR GREEN BIAS ADJUSTMENT
Figure 2.
Figure 3.
1
2
3
4 5 6
7 98
RD(–)
RD(+)
BD(–)
BD(+)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
FOR RED DRIVE ADJUSTMENT
FOR BLUE DRIVE ADJUST-
BIT FUNCTION
DATA
01
TV 00: TV
0, 1 HOTEL 01: HOTEL
MONITOR 10: MONITOR (*1)
11: INHIBITED (=TV)
2 VIDEO INPUT NONE (*2) YES
00: NONE
3, 4 CLOCK
01: YES (AC 60 HZ)
10: YES (INT OSC)
11: INHIBITED (=NONE)
5 STEREO/MONO MONO (*3) STEREO
00: NONE
6, 7 SURROUND
01: YES
10: Q-SOUND
11: INHIBITED (=NONE)
BIT FUNCTION
DATA
01
0 NOT USED — —
1 COLOR ENHANCER NONE YES
2 INITIAL CHANNEL NONE YES (*4)
3 BEAM DET NONE YES
4 PIP NONE YES
5 NOT USED — —
6 NOT USED — —
7 NOT USED — —
Note 4. Red/Green/Blue Bias Adjustments in Service Menu
NO. 41: Adjust each Bias Level with 1, 3, 4, 6, 7, or 9 key on
the remote control. (See figure 3.) The Bias Level adjust-
ment data will be written in the Service Menu No. 08 ~ 10
automatically.
To Next Page
Loading...
