Sanyo DVP-P1EX - For Correct Use of Your Printer

12 English
FOR CORRECT USE OF YOUR PRINTER
k Maintenance
i Cleaning
1 Turn off the power, and remove the power plug from the power outlet.
2 Use a soft cloth to gently wipe the printer clean.
To remove stains
3 Moisten a cloth with a solution of water and a mild detergent. Wring the cloth out
well before using it to wipe the printer. Follow by polishing with a soft, dry cloth.
4 Remove any dust from the ventilation holes on the front panel
h Dust entering the printer from the ventilation holes will adhere to the prints and
diminish their quality.
i Caution
h Never use benzine or thinner to clean the printer, as doing so may cause deforma-
tion or paint peeling. Also, before using a chemically treated dustcloth to clean the
printer, make sure to read all accompanying instructions.
h Do not allow pesticides or flammable substances to come into contact with the
printer or paper tray. Also, do not allow rubber or vinyl objects to contact the printer
for a long period. They may cause deformation, discoloration, or paint peeling.
k When not using the printer for a long period
h Remove the power cord.
However, when the power is interrupted for a long time, the printer functions may
begin to not work properly. Periodically turn on the printer and use it to maintain
the functions.
k Caution concerning condensation
h Using the printer or card with condensation inside it may damage it.
i If condensation seems likely to form
h Place the printer in a plastic bag and seal it, and then wait until the printer has
reached the ambient temperature.
i Be careful of condensation under the following conditions
h When moving the printer suddenly from a cold place to a warm place.
h When the ambient temperature changes drastically, such as when a heater is
turned on to quickly heat the room.
h When the printer is placed in the path of cool air from an air conditioner.
h When the printer is placed in a location of high humidity.
DVP-P1_E.book Page 12 Wednesday, July 23, 2003 3:20 PM