Sanyo ECR-238 - Page 13

SYSTEM PROGRAMMING
Key Sequence
<P mode>
(2)--ST--(A B C D E F G)--[#/NS]--[#/NS]
+1= affect,
+0= not affect
+2= round off,
+0= round up
+1= non print,
+0= print
C= +4][RECD ACCT] key works on +4= Credit Card key,
+2
+2|Split pricing rounding
+1|Tax1, Tax2, Tax3 on receipt/journal
credit card mode +0= Currency Conversion key
*Drawer must be closed to start | +2= must be closed,
transaction +0= none
+1}Cash in drawer declaration +1= compulsory,
compulsory in Z mode +0= option
D= +4/Beep tone for numeric key entry +4= Off,
2|[%1] key works as mark-up key +2= Yes, 40= No
+,
+1|Receipt number starts from programmed +1= Yes, +0= No
number after taking Z-report
4/Negative amount purchased
+2|Zero (0) entry for department
+1 |% discount operation
= +4|Department Refund operation
+2|General Refund operation
+1|Amount discount operation
+1= in M mode only,
ransaction void operation
a
Void operation
+2
ae conversion & Credit card
+0= allowed in R
oo A switch to detect the status of drawer may
be provided by option.
+4= in M mode only,
+0= allowed in R
+2= in M mode only,
+0= allowed in R
+1= in M mode only,
+0= allowed in R
+0= allowed in R
+2= in M mode only,
+0= allowed in R
+1= in M mode only,
+0= allowed in R
+0= allowed in R
+2= in M mode only,
+0= allowed in R
DEPARTMENT PROGRAMMING
Key Sequence
<P mode>
(1)--ST ALL--(A B C D)--[DEPT.]--[#/NS]
Amount entry is compulsory +2=Compulsory, +0= Optional
Single item cash department +1= Yes, +0= No
B= +4/Tax rate 3 is charged +4=Charged, +0=Not Charged
+2/Tax rate 2 is charged +2=Charged, +0=Not Charged
+1=Charged, +0=Not Charged
+1|Tax rate 1 is charged
Mo.9 | Most significant digit of entry limit
0-9 | Number of subsequent 0's of entry limit
*item A = 5 ... can not program
*In case of CD = 42 ... 4x10? = 400 (i.e. 399 max)
UNIT PRICE
Key Sequence
<P mode>
(2)--ST ALL--(@@@@@@)--[DEPT.]--[#/NS]
(@@@@@@) : Unit price (Max. 6-digits)
PLU PROGRAMMING
Key Sequence
<P mode>
(1)--ST ALL--(0X)--[PLU]--(A)--[DEPT.]--[#/NS]
XXX : PLU code (1~330)
A: PLU status
A= +8]Not used PLU
+1|Sequential group total flag +1= Group flag, +O= Normal
UNIT PRICE
Key Sequence
<P mode>
(2)--ST ALL--(XXX)--[PLU]--(@@@@@@)--[DEPT.] [#/NS]
XXX : PLU code (1~Max. 330)
(@@@@@e@) : Unit price (Max. 6-digits)
(DEPT.] : Linked department key
TENDERING KEYS PROGRAMMING
[GASH], [EHEGUE],
Key Sequence
<P mode>
(1)--ST ALL--(A B C)--[TENDER KEY]--[#/NS]
+2= Compulsory,
+0= Optional
+1= Compulsory,
+0= Optional
Most significant digit of entry limit.
0-9
C= {Number of subsequent 0's of entry limit.
0-9
*Preset an entry limit in the same manner as
departments.
*In case of BC = 42...
+2!Amount entry is Compulsory
+1][ST ALi] key depression is Compulsory
4x10? = 400 i.e. 399 max
FUNCTION KEYS PROGRAMMING
MNTX/TXST], |RECD ACCT], |PAID OUT],
Key Sequence
<P mode>
(1)--ST ALL--(A B)--[FUNCTION KEY]--[#/NS]
Most significant digit of entry limit.
Number of subsequent 0's of entry limit.
*Preset an entry limit in the same manner as
departments.
*In case of BC = 42 ... 4x10 = 400 i.e. 399 max
pana fp ee