Sanyo ECR-238 - Page 9

6. CUSTOMIZING KEYBOARD 6-2. Assign the new-key code to keyboard
Key Sequence
6-1. Typical keyboard layout <P mode>
1111 -- [ST ALL] -- nn -- [KEY] -- [#/NS]
nn : key code. (See Key Code Table)
[KEY] : Press the key on the keyboard that you
Re will assign it to.
NOTE : The following keys will keep the original key
position with their functions even after
assigned to any other places.
*Numeric keys, *CLEAR key, *Paper feed key
fees aes eee
AMT TEND
@ Type 1 (English)
CASH
Each key on this terminal's keyboard and optional
keys are identified by a number shown below:
KEYBOARD CODE} KEYBOARD |CODE|; KEYBOARD |CODE
CHARACTER CHARACTER CHARACTER
@/FOR/TIME
|@/FORTIME | 16_|
RECPT OFF/ION| 17_|
NOTE : Code No.1~13 are not relocatable keys.
© Type-4 (Spanish) 6-3. Disable the key on the keyboard
Key Sequence
DERIV a <P mode>
STNET cae 1111 -- [ST ALL] -- 0 -- [KEY] -- [#/NS]
[KEY] : Press the key on your keyboard that you
want to disable.