1. Ordinary Use
(Example) When program No. 3 is programmed as:
First stage ( Max power for 30 seconds.) and Second stage (Power Level 2 for 1 min.)
OPERATING INSTRUCTIONS (4)
HEATING METHOD
Operational flow Display Window
1.
2.
3.
Cooking time ends
Remove the food from oven.
Place food in oven
Touch PROGRAM key
number “3” (Heating Starts).
“0” will appear on the display
Stage 1 bar blinks. Stage 2 bar &
lower colon lights. Heating time
“30” will show and count down.
After 1st stage is completed,
Stage 2 bar binks. Heating time
“1.00” will show and count down.
The “beep” tone sounds, “0” will
show.
10
To Next Page
Loading...
