SWITCHES AND MICROWAVE PARTS
Key
Part No. Description Q’ty
No.
18 411 082 5201 SCR TPG TRS 4 x 10 Z1 2
19 617 196 8507 Blower Fan 1
20 617 124 1181 Latch Lever*** 1
21 617 221 4078 Micro Switch,*** Primary Interlock 1
AM51630C53F2
22 617 221 4061 Micro Switch,*** Interlock Monitor 1
AM50620C53
23 617 221 4078 Micro Switch,*** Door Sensing 1
AM51630C53F2
24
25 617 124 1174 Lever Stopper*** 1
26 411 102 5907 SCR ETG TRS 4 x 10 N2 2
27
28 617 117 3505 Harness, (Door Sensing) 1
29 617 124 3796 Lead Wire Ass’y 1
30
31 411 001 4704 SCR S-T PAN 4 x 10 Z1 1
32
33 411 160 6106 SCR S-T TRS + SRT 4 x 10 Z1 1
Key
Part No. Description Q’ty
No.
1 411 082 5201 SCR TPG TRS 4 x 10 Z1 8
2 617 208 0260 H.V. Transformer,*** YS-X670SAP 1
3 617 199 8283 Stay, Cavity & Magnetron 1
4 411 006 6604 SCR TPG PAN 3 x 6 Z1 1
5 617 124 1235 Thermostat, Magnetron 122
o
C1
6 415 002 6101 Magnetron,***2M219H(B)A- 1
7 423 022 7503 Fuse, 250V 8A 1
8 617 213 3416 Power PCB 1
9 617 225 8553 Lead Wire Ass’y, with Diode 1
10 617 162 1990 Space Partition (Blower) 1
11 617 212 9013 H.V. Capacitor including Resistor, 1
1.10µf 2.5KV
12 617 182 2373 Capacitor Band 1
13 411 011 5609 Bolt Hex 4 x 10 Z1 4
14 617 198 4996 Duct, Magnetron Exhaust 1
15 617 110 3618 Lamp, 240V 25W 1
16 617 124 1280 Lamp Socket 1
17 617 167 0592 Blower Motor 1
- 6 -
Parts marked with this sign are supplied with
High Voltage exceeding 250V.
Parts marked with this sign have special characteristics
important for microwave leakage. When replacing any of
these parts use only manufacturer’s specified parts.
*** ALL SERVICE ON MICROWAVE OVENS SHOULD BE PERFORMED BY A QUALIFIED TECHNICIAN USING
APPROVED TESTING EQUIPMENT. CUSTOMERS SHOULD NOT ATTEMPT TO REPLACE PARTS
IDENTIFIED BY A TRIPLE ASTERISK (***).
To Next Page
Loading...
