Sanyo FW24E05F User Manual

HDMI-CEC
This function allows you to operate the linked functions between our
brand Devices with an HDMI-CEC feature and this Unit connecting
through an HDMI cable. You must connect this Unit to our brand HDMI-
CEC devices and be sure it's HDMI-CEC setting is also set to On.
1
Use H I to select HDMI-CEC), then press ENTER/OK.
On
On
On
Auto TV on
Device list
Auto device off
USB
Language
Features
Setup
Sound
Picture
On
Device control
HDMI-CEC Control
*
2
Use H I J K to Select the item you want to adjust, then press
ENTER/OK.
Set the HDMI-CEC control On or Off. The following additional settings
will be grayed out when you set them to Off.
HDMI-CEC control
Off
Disables All HDMI-CEC.
On
Selects if you have connected an
External Device that is compatible
with the HDMI-CEC function.
You can set your connected HDMI-CEC device to Turn Off by interlocking
from this Unit’s Power.
Auto device off
Off
Your connected HDMI-CEC device
stays On even if the Unit goes into
Standby mode.
On
Your connected HDMI-CEC device
Turns Off Automatically when the
Unit goes into Standby mode.
This Unit will Turn On when the Power On Signal is sent from your
connected HDMI-CEC device.
Auto TV on
Off
This Unit stays in Standby mode
even if you Turn On your
connected HDMI-CEC device.
On
This Unit Turns On Automatically
when you Turn On your connected
HDMI-CEC device.
You can operate some functions such as Disc Playback or call up the
menu of the connected devices, by using this Unit’s Remote Control.
Device control *
Off
Disables the device control.
On
PLAY K / STOP C / FWD D /
REV E / SKIP G / SKIP H /
PAUSE F / LINK / HIJ K /
ENTER/OK / EXIT / the NUMBER
buttons / RED / GREEN / BLUE /
YELLOW can be used to control
your connected HDMI-CEC
devices by this unit’s remote
control.
Note(s)
●
Some Set-top Boxes are not compatible with HDMI-CEC, this is not a malfunction.
Device list
This function lets you see the product model number or name of
Connected Devices.
Use H I to select the desired HDMI-CEC devices listed on the TV
screen, then press ENTER/OK.
Your connected HDMI-CEC device will be Turned On if this device is in
Standby mode.
Blu-ray disc playerHDMI2
DVD recorderHDMI1
USB
Language
Features
Setup
Sound
Picture
28 .English
Continued on next page.

Sanyo FW24E05F Specifications

General

Brand	Sanyo
Model	FW24E05F
Category	LCD TV
Language	English