EasyManua.ls Logo

Sanyo ICR-B150 - Troubleshooting Guide; Common Issues and Solutions

Sanyo ICR-B150
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
The unit does not operate.
The batteries are discharged or not installed.
Insert two new AAA batteries.
and LOW BATT appear.
The batteries are discharged.
Insert two new AAA batteries.
POWER OFF appears when the operation button is pressed.
Hold function is set.
Slide the POWER switch to ON.
No sound.
The earphone is plugged in.
Unplug the earphone.
The volume is turned down completely.
Press the + VOLUME button to adjust the sound level.
Cannot erase.
The erase guard is set. ( appears.)
Cancel the erase guard. Refer to ERASE GUARD on page 24.
MEMORY FULL appears.
The memory capacity is full.
Erase unnecessary files. Refer to ERASING on page 19.

Related product manuals