Sanyo Katana - Section 2 H: Using Your Phone’s Voice Services

114 Section 2F: Using Contacts
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer Types”on
page 51.)
To select a ringer type for an entry:
1. From standby mode, press Contacts (right softkey).
2. Select the entry for which you want to set the incoming
ringer and press .
3. Pr
ess
Options(righ
t softkey)
>Edit, or pr
ess
Edit (righ
t
softkey) if you are selecting an email or Web address.
4. Scroll down to the box next to the icon and press .
5. Select a ringer and press . (When you highlight a
ringer type, a sample ringer will sound.)
6. Press Save(left softkey) to save the ringer type.
Tip:You can backup your Contacts list to the Sprint Web site. For
information about using Wireless Backup feature, select >Contacts >
Wireless Backup > Learn More,or see “Setting Wireless Backup Service”on
page 71.
6600US.qxd 06.6.20 8:48 AM Page 114