MENU
OPERATION
@
This func'tion
has
3
modes,
"Standby", "On"
and
'Last'.
Under
"Standby'
mode, the LCD will come to Power-Off state afterAC OFF/ON.
Under
the
"On"
mode. the LCD will
come
to Power-On state after the AC
OFF/ON.
Under the
"Last'
mode:
lf
the
power
is On state before
the AC
OFF,
the LCD will
come
to Power-On
after the AC
ON.
lf the
power
is
Off state before
the AC
OFF,
the LCD will come lo Power-Off
after the AC ON.
@
This function
supports
5
channels
to
listen
1o music on ATV.
Note:
"First
5
channels"
means the
(first,
semnd
,lhird,
fourth and fifth)
channel after TV autcsearching.
Setting is in
done
in the next layer by
pressing
> button in Dealer
Mode.
Each ilem
can be selected
from the assigned channels from 0 to 99.
(Selected
channel needs to exist in the TV)
lf the items
are set
to
OFF,
the
channel
will return lo
show
original
picture.)
r
Fundion returns
to the
initial
value
of
the Dealer mode setting.
@
The function
supports
the masler
baud
rate lo
control
the
parameters
of
the
system.
lf the Baud Rate is different from the control. the command won't be execuled.
Be sure to disconnect the
power
cord
from
AC outlet before deaning lhe LCD TV.
Clean
your
LCD TV
as
follows:
.
Gently
wipe the
screen
and cabinet with a dry, soft cloth.
.
The screen is
likely
to be damaged if it
is
not maintained
properly.
Do not use hard
doth or
paper.
Do nol use
solvents or abrasives.
CAUTION:
Do not use benzene, thinner, or any
volatile
substances
to
clean the LCD TV. These
chemicals
may damage the
cabinet finish.
To
ensure
producl
safety,
protective
features
are
provided
inside the LCD TV. Please
refer lo the following.
47
To Next Page
Loading...
