Sanyo LED-32XR10FH - Adjusting Basic Settings

Adjusting Basic Settings
Adjusting basic settings
SELECT
MOVE
MENU
RETURN
Audio Preference
Dolby Digital
OSD Language
English
Judder Adjustment
Level 1
PICTURE SOUND TIME OPTION LOCK CHANNEL
Hearing Impaired
Off
S/PDIF Output
AUTO
To adjust basic settings:
1
Press 3or4 to display OPTION menu, press 6 to access.
2
Press MENU. The on-screen menu opens.
Press 6 or 5 to select an option, press 3or4 to adjust the
option.
3
4
To close the menu, press EXIT button.
From OPTION menu you can select and adjust the following:
OSD Language — Selects on-screen menus language. In this model, only ENGLISH is available.
Hearing Impaired (digital only) — Selects On to display the subtitles (if available) for the hearing impaired.
S/PDIF Output (digital only) — Selects the digital audio output mode for S/PDIF. You can select AUTO or
PCM.
. AUTO: This mode outputs Dolby Digital or PCM to the digital audio output jack (S/PDIF) providing it is being
broadcast.
. PCM: Select this when a 2ch digital stereo amplifier is connected to the TV. When you select a Dolby Digital or
MPEG audio track, the sound is converted to the PCM (2ch) format and output.
Audio Preference (digital only) — Selects the audio track to output. You can select MPEG or Dolby Digital*.
. MPEG: If the programme has MPEG and Dolby Digital tracks, select MPEG to output MPEG track in preference.
. Dolby Digital*: If the programme has MPEG and Dolby Digital tracks, select Dolby Digital to output Dolby
Digital track in preference.
* Manufactured under license from Dolby Laboratories.
Dolby and double-D symbol are trademarks of Dolby Laboratories.
Judder Adjustment — When viewing programs, picture problems such as Blur and Judder may occur, and
different programs have different amount of Judder. The Judder Adjustment option will help you correct this
picture problem by reducing the amount of judder on your TV. You can select the required level that suits your
taste, select Off to turn off this feature.
. Level 1: Select for news programs or similar programs.
. Level 2: Select for movie or general programs.
. Level 3: Select for sports programs.
 Audio Only — When listening to radio programs, or listening to MP3 music (under MUSIC source or USB music
play), you can set Audio Only to Power Saving for energy save. The backlight will turn off automatically after
some seconds. Select Normal then the backlight works normally.
24
Audio Only
Normal