Table 5 Video & audio signal formats of digital HDMI
No. Item Unit Parameter Note
1 Video
Deep color:RGB 4:4:4(24 bit/pixel,30 bit/pixel,36 bit/pixel)、
YUV 4:4:4 (24 bit/pixel,30 bit/pixel,36 bit/pixel)、
对于1080p,deep color只支持到30 bit/pixel。
YUV 4:2:2(16 bit)、YUV 4:2:2(20 bit)、YUV 4:2:2(24 bit)
2
Audio sample
freqence
kHz
32、44.1、48
3
Audio data
width
Bit
16、20、24
5.6 USB port
5.6.1 PVR function
Insert a formatted U disk in which recorded programs have been saved; press key “Record
List” to choose and play one program, check picture, sound and other functions;
5.6.2 Media playing function
Insert a U disk kept files of picture, sound and video, check picture, sound and other
functions;
Supported media formats as below:
Photo:JPEG,BMP,PNG
Video:H.264 ,MPEG-1,MPEG-2,VC-1,FLV
Audio:WMA,MP3,M4A (AAC)
5.7 Music port (depending on different models whether contain the port or not)
Input audio signal to back VGA MUSIC/AUDIO In port from audio output equipment, check audio
output is normal or not.
5.8 Other functions check
a) Check timing on/off, sleeping time off, picture/sound mode, OSD, stereo, digital audio port,
etc,;
b) Check pure digital audio programs (RADIO) ;
c) Check logical channel number (LCN);
d) Check HDMI ARC;
e) Check HDMI CEC;
f) Check OAD for special customer;
6 User Menu Setting before Ex-factory
Enter into Factory Menu and choose “Shipment” to perform presetting before ex-factory;
Main procedures are described as follow:
a) Clear out all programs;
b) Clear out information of VCHIP,parent control, etc.;
c) Default user analog parameter setting;
d) Recover default password;
e) Set Menu Language as English;
f) Set Power mode as Standby。