Sanyo MBR-704G - SPECIFICATIONS AND PERFORMANCE; Technical Specifications; Performance Characteristics

21
SPECIFICATIONS

Name Blood Bank Refrigerator
Model MBR-704G MBR-704GR
External dimensions W770 x D830 x H1955 (mm)
Internal dimensions W650 x D697 x H1500 (mm)
Effective capacity 625 L 617 L
Exterior Painted steel
Interior Painted steel
Door Steel plate with double layer pair glass, automatic closing mechanism
Insulation Rigid polyurethane foamed-in place
Shelf Hard steel wire on polyethylene coating
6 pcs.
-----
Drawer ----- Stainless steel, Handle with card holder
6 pcs.
Access port Left side, right side, Inner diameter 30 mm
Compressor Hermetic type, Output; 220 W
Condenser Wire tube type
Evaporator Fin tube type
Refrigerant R-134a
Temperature controller Microprocessor control system
Temperature display Digital display
Alarm High temperature, Low temperature, Door, Power failure, Sensor
Remote alarm contact Allowable contact capacity: DC 30V, 2A
Memory back-up Nonvolatile static memory
Fluorescent lamp White light 20 W (FL20SD) x 1 (Glow starter; FG-1P)
Accessories Key 1 set, Bolt 2 sets
Battery
For power failure alarm, Nickel hydrogen battery, DC 6V, 1100mAh, Automatic charge
Weight 195 kg 210 kg
Note:The contents of this manual are subject to change without notice.


PERFORMANCE

Chamber temperature
+4
o
C±1
o
C (ambient temperature; 5 to 35
o
C)
Power source
(Alternate current)
110V
60Hz
115V
60Hz
220V
60Hz
220 V
50Hz
230 V
50Hz
240 V
50Hz
220-240V,
50Hz
Rated power consumption 300W 310W 300W 290W 310W 330W 330W
Noise level 45 dB [A] (background noise; 20 dB)
Maximum pressure 1630 kPa
Note :The unit with CE mark complies with EC directives 89/336/EEC, 93/68/EEC and 73/23/EEC.