Sanyo MCD-Z1F - Laser Beam Safety; Removal and Installation; Top Panel

ii
.
.- -
LASER BEAM SAFETY PRECAUTIONS
.
Pick-up that emits a laser beam is used in this CD player.
-.
d
CAUTION :
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDO
RADIATION EXPOSURE
LASER OUTPUT ........0.6 mw Max.
WAVELENGTH ...........7’90 nm
.
REMOVAL AND INSTALLATION
. Disconnect the power cord’s plug from the electrical outlet.
. All wiring should be returned to the original position after work is completed.
. First have ready many the new FIXERS (614 129 4971) for replacement.
● Arrange the lead “wires so that they are not near the heat sink.
.,.,.
a. CABINET
(1) Remove the battery lid.
(2) Remove the 7 rear cabinet
mounting screws. ( } )
b. TOP PANEL
(1) Remove the 4 top panel
mounting screws.
(2) Remove the top panel.
(3) Remove the chuck pulley.
-1-