3
Caution on batteries
To prevent battery electrolyte leakage, which
may result in injury and damage to the unit or
other objects, observe the following precautions:
1. All batteries must be installed with the proper
polarity (see diagram on the rear of the unit).
2. Do not mix new with old or used batteries.
3. Only use batteries of the same type and
brand.
4. Remove the batteries when they are not to
be used for a long period time.
5. When the batteries have become
discharged, they must be disposed of in a
safe manner which complies with all appli-
cable laws.
POWER SUPPLY
GENERAL OPERATION
Adjusting the volume
Turn the VOLUME control.
Bass expander button
Press the BASSXPANDER button to Z ON to
enhance the bass sound.
1
Battery compartment lid
2 3
Headphones
Connect stereo headphones (not supplied) to
the PHONES socket for monitoring or for private
listening. The speakers are automatically dis-
connected when headphones are connected.
AC POWER
Connect one end of the mains lead to the AC
INPUT ~ socket and the other end to an AC
outlet.
Note:
• The installed batteries are automatically dis-
connected when the mains lead is con-
nected to the unit.
• The FUNCTION switch is mounted on the
secondary side. The unit is not disconnected
from mains, even switched off.
BATTERY POWER
Installing batteries
Install eight “D/R20” batteries (not supplied) as
shown below.
56
12
43
87
MCD-ZX100F/AU 7/5/04, 10:10 AM4
To Next Page
Loading...
