UPDATE
R
L
SPEAKE R
-
AC INP UT
RF
AV INPUT
VIDEO
RL
AUDIO
HEAD PH ONE
S- VIDEO
(
)
SCART2 V ID E O/S -V ID EO
(
)
SCART1 V ID E O/R GB
VGA
AU DIO IN
HDMI
COMPONENT INPUT
R-AUD IO- L
C /P
r r
C /P
b b
Y
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their
terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
10
Connect a VCR
Note:
The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal format
automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.
The SCART 1 always output TV signal, therefore, when the unit is not in TV mode and you would like to record TV program,
please connect the VCR to the SCART 1 interface.
To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART interface on the
unit, and the unit receives CVBS(VIDEO) signal only.
Select Main Source
1. TV
2. Video
3. S-Video
5. Scart 2 AV
6. Scart 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
4. Scart 1
Connect the SCART Cable between the unit and the VCR.
How to connect:
1. Turn on your PDP TV , press SOURCE button on the remote
control.
2. Push ENTER(Up/Down) to select Scart 1 and press ENTER to
confirm.
3. Turn on your VCR, insert a videotape and press the Play button.
To play VCR
-
S VIDEO
AV IN
Rear of the VCR
VCR
RL
VIDEO
AUDIO
21-pin Euro-SCART
connector
SCART
Cable
SCART
To Next Page
Loading...
