Connections (continued)
11
Connect a Decoder
Decoder
21-pin Euro-SCART
connector
Note:
<The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.
<When receiving Y/C signal, you need to select Scart 2 Y/C instead of Scart 2 AV in the source select menu. Therefore,
if you find that the colour is not properly displayed, please try to select Scart 2 Y/C.
<The SCART 2 outputs signal which is being displayed on the screen.
<The signal inputted from VGA, HDMI or YPbPr/YCbCr terminals can not be output again.
<To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART interface on
the unit, then please select Scart 2 AV and the unit receives CVBS(VIDEO) signal only.
Select Main Source
1. TV
2. Video
3. S-Video
4. Scart 1
6. Scart 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
5. Scart 2 AV
Connect the SCART Cable between the unit and the Decoder.
How to connect:
1. Turn on your PDP TV , press SOURCE button on the remote
control.
2. Push ENTER(Up/Down) to select Scart2 AV and press ENTER to
confirm.
3. Turn on your Decoder.
To watch Decoder
UPDATE
R
L
SPEAKE R
-
AC INP UT
RF
AV INPUT
VIDEO
RL
AUDIO
HE AD PH ONE
S- VIDEO
(
)
SCART2 V ID E O/S -V ID EO
(
)
SCART1 V ID E O/R GB
VGA
AUDIO IN
HDMI
COMPONENT INPUT
R-AUD IO- L
C /P
r r
C /P
b b
Y
To Next Page
Loading...
