Need help?Do you have a question about the Sanyo SANUPS A11J and is the answer not in the manual?
Critical safety measures for installing the UPS, covering environment and physical placement.
Essential safety procedures for wiring the UPS, emphasizing qualified personnel and grounding.
Key safety instructions for operating the UPS, including warnings and prohibitions.
Procedure for charging the UPS batteries to ensure adequate backup power.
Step-by-step guide to starting up the UPS unit.
Procedure for safely shutting down the UPS and connected load devices.
Critical safety measures for installing the UPS, covering environment and physical placement.
Essential safety procedures for wiring the UPS, emphasizing qualified personnel and grounding.
Key safety instructions for operating the UPS, including warnings and prohibitions.
Procedure for charging the UPS batteries to ensure adequate backup power.
Step-by-step guide to starting up the UPS unit.
Procedure for safely shutting down the UPS and connected load devices.
General| Frequency | 50/60 Hz |
|---|---|
| Phases | Single-phase |
| Topology | Line-Interactive |
| Input Voltage | 100-120V / 200-240V |
| Output Voltage | 100-120V / 200-240V |
| Capacity | 1 kVA to 3 kVA |
| Battery Type | Sealed Lead-Acid |
| Backup Time | 5-15 minutes (depending on load) |
| Dimensions | 145 x 400 x 220 mm |
To Next Page