Need help?Do you have a question about the Sanyo TS2422 and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | TS2422 |
| Category | Air Conditioner |
| Language | English |
Area where room air is drawn into the unit for filtration and cooling.
The part of the unit through which cooled air is discharged into the room.
The wireless device used to operate and control the air conditioner functions.
Connectors carrying refrigerant gas between the indoor and outdoor units.
Tube that carries away condensed moisture from the indoor unit.
The external unit containing the compressor, fan, and heat exchanger.
The sensor on the indoor unit that receives signals from the remote control.
Indicates when the unit is in continuous COOL or FAN mode.
Lights up when the unit is operating under timer control.
A switch on the indoor unit for manual operation control.
Selector position for operating the unit with the remote control.
Selector position to turn off normal operation; power must be cut for complete shutdown.
A position used only for servicing the air conditioner.
The remote control device that sends signals to the air conditioner.
The screen on the remote control showing current settings and time.
Button used to turn the air conditioner on or off.
Protective cover on the remote control that opens to reveal more buttons.
Buttons used to adjust the desired room temperature up or down.
Buttons used to set and adjust timer functions for operation.
Button to select modes or initiate timer programming.
Button to activate energy-saving mode during cooling.
The component that measures room temperature for the remote control.
Button to control the automatic oscillation of the air outlet flap.
Controls the automatic sweeping motion of the air outlet flap.
Switch to select operating modes: FAN (circulation) or COOL (cooling).
Switch to set timer operation: NORM (no timer), OFF (stop timer), ON (start timer), PROGRAM (daily schedule).
Switch to manually select fan speed: AUTO, HIGH, MED., LOW.
Measures room temperature to assist in automatic fan speed control.
Step-by-step guide for inserting batteries into the remote control.
Recommendations for placing the remote control for optimal signal reception.
Step-by-step instructions for setting the unit to cooling mode.
How to activate and understand the night setback energy-saving feature.
Methods for controlling the fan speed, including automatic selection.
Setting the fan speed selector to AUTO for microcomputer control.
Table showing fan speed adjustments based on temperature difference.
Manually adjusting fan speed to HIGH, MED., or LOW during cooling.
Steps to operate the unit solely for air circulation without cooling.
How to turn the unit on using the operation selector when it is off.
How to turn the unit off using the operation selector when it is running.
Procedure for setting the current time on the remote control.
Procedure for setting the time when the unit should turn off.
Procedure for setting the time when the unit should turn on.
Setting up automatic daily start and stop times.
Activating the automatic sweeping function of the air outlet flap.
Setting the air outlet flap to a specific, fixed direction.
How to clean the exterior surfaces and grilles of the indoor unit.
Information and instructions related to the air filter maintenance.
Steps for safely removing the air filter for cleaning.
Steps to diagnose and fix problems where the unit fails to start.
Troubleshooting steps for intermittent compressor operation.
Identifying and resolving issues related to reduced cooling efficiency.
To Next Page
