4 Select the radio button to specify whether to set detection lines or areas and configure
the detection conditions. When finished, click SET and then BACK .
Although you need to specify whether to set detection lines or areas, you can view the set detection lines and
areas together.
1 Setting detection lines
Select the radio button next to [LINE] and drag the mouse to draw detection lines.
You can draw up to eight detection lines.
Each detection line has a serial number (1 to 8) and area designations (A and B).
2 Setting detection areas
Select the radio button next to [AREA] and drag the mouse to draw detection areas.
You can draw up to four detection areas.
Each detection area has a serial number (1 to 4) and area designations (A and B).
3 Configuring detection conditions
Select the [LINE]/[AREA] radio button, select a line/area number, and specify the detection conditions for it. In this
way, configure detection conditions for all the detection lines and detection areas.
To delete a detection line/area, select the [LINE]/[AREA] radio button, select a line/area number, and
click DELETE .
<Example: Configuring detection conditions for LINE 1>
1 Select the [LINE] radio button and, in the pull-down menu, select the line number “1”.
2 In [SIZE], select the size of the object you want to detect.
Specify the size of the object you want to detect.
To Next Page
Loading...
