Need help?Do you have a question about the Sanyo VDC-HD3100/HD3100P and is the answer not in the manual?
General| Model | VDC-HD3100/HD3100P |
|---|---|
| Category | Security Camera |
| Type | IP Camera |
| Lens Type | Fixed |
| Lens Focal Length | 3.6mm |
| Lens Mount | M12 |
| Video Compression | H.264 |
| Frame Rate | Up to 30 fps |
| Audio Compression | G.711 |
| Network Interface | 10/100 Ethernet |
| Weatherproof | IP66 |
| Resolution | 1080p (1920 x 1080) |
| Day/Night Function | Yes |
| Infrared Range | Up to 20m |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, SMTP, NTP, RTSP |
| Power | DC 12V, PoE |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Image Sensor | 1/3" Progressive Scan CMOS |
Details technical specifications including image sensor, resolution, illumination, lens, and connectivity options.
Step-by-step guide for connecting the camera to your PC for network operation.
Steps to prepare your computer for network operation, including software installation.
Using the Auto IP Setup utility to assign unique IP addresses to multiple cameras.
Configures network settings like IP address, subnet mask, gateway, and DDNS.
Sets camera title, date/time, timezone, daylight saving, and clock adjustment methods.
Manages user authentication settings and changes user passwords.
Configures aspect ratio, JPEG image quality, and H.264 video stream parameters.
Adjusts various camera parameters including iris, white balance, shutter, AGC, and focus.
Sets up alarm detection via input terminals or motion sensor and alarm output.
Restricts PC access to the camera using global and individual access policies.
To Next Page
