1 In the [PASSWORD CHANGE] field, type a new password.
You can type 4 to 32 alphanumeric characters.
2 In the [CONFIRM PASSWORD] field, type the same password again for confirmation and
click SET .
These items will not be shown if [PASSWORD SET] is set to “admin” on the USER REGISTRATION
screen.
Update your password periodically for security reasons.
Click MENU on the control panel to display the configuration menu that includes a series of menu selection
buttons.
Clicking one of these menu selection buttons displays the corresponding configuration screen.
If you are a surveillance system administrator, use these buttons to configure necessary settings according to the
installation environment and application of your camera.
Required operation privilege: admin, operator1 (“admin” only for NETWORK SETTINGS screen)
Without the required operation privilege, you will be presented with an authentication check dialog
box when you click MENU on the live screen. In this case, you cannot access the menu selection
buttons until you enter an adequate user name and password.
To Next Page
Loading...
