Sanyo VM-D6P - PLAYBACK

PLAYBACK
The tape recorded by this camcorder can be viewed on a
TV screen, or in the viewfinder of this unit.
See page 26 for TV connection diagrams.
1. Switch the power on.
2. Slide the EJECT switch.
3. Insert a recorded cassette. Gently press the cassette
holder ("PUSH" indicator section).
The unit will enter the recording pause mode.
Skip step 4 (press the STOP button), if the cassette
has already been protected against accidental
erasure.
4. Press the STOP button.
5. Press the PLAY button.
Playback will begin.
To stop the tape, press the STOP button.
If you wish to listen to the recorded sound while playbacking
in the viewfinder, connect a commercially available earphone
to the EARPHONE jack.
Note : : CUM
eit the tape has been recorded on another B-mm video
recorder, the beginning of the tape may not be
correctly reproduced due to difference in mechanism
(loading system). ' i
EARPHONE jack