Sanyo VM-D6P - MACRO (CLOSE-UP) FOCUSING

y MACRO (CLOSE-UP) FOCUSING
Under ordinary conditions, a subject's image cannot be
focused in the viewfinder if the subject is within about 1.2 m
of the camcorder. Macro focusing can be used to focus on
closer subjects (from 1.2 m to about 15 mm from the
camcorder).
Set the FOCUS switch to MAN.
Press and hold the MACRO SET button.
Move the manual zoom lever to the MACRO range.
Approach the subject and adjust the ZOOM lever within
the MACRO range (area within the green bracket) to
focus the subject's image in the viewfinder.
Bom
To return to normal shooting, manually turn the ZOOM
LEVER or press and hold the POWER ZOOM until the
lever clicks into the tele position.
einadvertent camcorder movement will reduce the
quality of macro recordings. The use of a tripod or
stand to hold the camcorder fixed in place during
macro recording is recommended.
Note :
€ The zoom feature cannot be used during macro recording. To reduce the size of the object in the viewfinder, the camera
and the object must be moved farther apart.