Sanyo VM-D6P - HIGH SPEED SHUTTER

HIGH SPEED SHUTTER
After recording an object in high speed motion, if you wish to watch the motion very slowly, for example to study a swing
in playing golf, the movement can be seen in a clear picture by still playback without blurs.
Still playback
With high speed
shutter.
Without high speed
shutter. 2000
The picture is blurred. The picture is clear
without blurs.
There may be picture noise caused by the still function of
this unit.
1. Press the HIGH SPEED SHUTTER button and select the
shutter speed to 1/2000 sec.
The shutter speed indication will appear and it will
change each time the button is pressed.
120 — 2000 — No indication 1.3
(1/120) (1/2000)
2. Start recording.
3. To return to normal recording, press the HIGH SPEED
SHUTTER button and make shutter speed indication
disappear.
Fickering may occur during indoor recording if
fluorescent light is used. Set the shutter speed to 1/120
sec. to reduce the effect.
Notes :
eit the high speed shutter is used for shooting in locations with low illumination such. as indoors, the screen will be dimmer
than usual. Shoot in a bright location such as outdoors on a clear day.
e Use the high speed shutter effectively. During normal playback, movement in pictures shot with the > high speed shutter
will not appear smooth: