Sanyo VM-D6P - AUTO FOCUSING

AUTO FOCUSING
The camcorder will automatically focus on the subject in the
center of the viewfinder's image when the FOCUS switch is
set to AUTO.
This is the normal position for this switch.
The focus indication will always be visible in the viewfinder.
AF
Auto Manual
The auto-focus feature will not operate normally in the following circumstances. Set the FOCUS switch to MAN and adjust
the focus manually.
It is not possible to focus on a nearby
subject and a distant subject at the
same time.
When shooting a subject through glass When shooting a dark subject.
which has something visible on it (e.g.
dirt, water drops, etc.), the auto-focus
will focus on the objects on the glass,
instead of the desired subject.
AT it
|
M
i
ji
When shooting subjects which have no
contrast such as a white wall, sky, etc.
When shooting a subject which has When shooting an extremely bright
lateral stripes. subject.
Notes :
€
While
the
auto-focus
feature
is
operating,
do
not
try
to
turn
or
stop
the
focus
ring.
€f
a
special
filter
is
used
(for
vari-cross,
mirages,
etc);
the
automatic
focus
feature
may
not
function
normally.
Manual
focusing is recommended.
@Focus
the
camcorder
manually
when
shooting
rapidly
moving
subjects,
moving
the
camcorder
(rapid
panning,
tilting,
etc.), or when objects aré passing between the camcorder and the subject being recorded.