Sanyo VM-D6P - MANUAL FOCUSING

FF
— ||
]
A4
MANUAL FOCUSING
1. Set the FOCUS switch to MAN.
2. Press the power zoom button for a close-up view of the
subject.
3. Turn the focus ring until the subject's image is sharp and
clear.
4. Press the power zoom button to obtain the desired
image.
FOCUS REVERSE
e When the FOCUS switch is set to AUTO
Press and hold down the FOCUS REV button while panning
The focus will remain fixed in the MANUAL mode during
the pan. producing a smooth picture as you move from
one subject to another. Release the button to return to the
AUTO focusing mode.
€ When the Focus switch is set to MAN :
For changing subjects press and hold down the FOCUS
REV button to automatically focus the image of the new
subject. Release the button to return to the MANUAL
focusing mode.