EasyManuals Logo

Sanyo VPC-T1495 User Manual

Sanyo VPC-T1495
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
EN-44
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the e / f buttons.
Select the print number (up to 99) with the
c /
d
buttons.
After selecting the desired image and printing
number, press
the
SET
button
to confirm.
4. Select [Exit] with the c / d buttons, and press
the
SET
button.
5. Select [Print] with the c / d buttons, and press
the
SET
button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer,
[ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
;;
Η
;
Η
;

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo VPC-T1495 and is the answer not in the manual?

Sanyo VPC-T1495 Specifications

General IconGeneral
BrandSanyo
ModelVPC-T1495
CategoryDigital Camera
LanguageEnglish

Related product manuals