Sanyo XT-43UHD4S - Channels Setup

19
Settings
Channels
Set up your TV to receive broadcast signal.
Analogue Setup
Select to customise and receive programmes.
Analogue Setup
- Analogue Auto Tuning: Press OK to start the automatic
search process. The search may take a few minutes.
During the process, you can press to and chosse YES
to exit.
- Analogue Manual Tuning: Press OK to enter the
interface.Press ◄/► to select your system,the
press ▲/▼ select Frequency and press OK to search,
fine tune or store the channel.
- Teletext Setup
(1)Preferred teletext:Press OK and then use ▲/▼to
select Preferred teletext.
(2)Decoding page language:Press OK and then
use ▲/▼ to select Decoding page language.
Channels Setup
Digital Setup
- Digital Antenna Tuning:Press OK to start the automatic
search process.The search may take a few minutes.
During the process, you can press and chosse YES
to exit .
- Subtitle Setup:
(1)Subtitle Setting:Include Off,Basic and Hearing Impaired
(2)Primary Preferred Language:
Press OK and than use ▲/▼ to select Primary Preferred
Language.
(3)Secondary Preferred Language:
Press OK and than use ▲/▼ to select Sencond Preferred
Language.
- Teletext Setup:
(1) Preferred teletext：
Press OK and than use ▲/▼ to select Preferred teletext.
(2) Decording page language：
Press OK and than use ▲/▼ to select Decording page
language.
- Audio Setup
(1)Dialogue Enhancemen:Include Off and On.
(2)Dialogue Enhancement Level:
Press OK and then use ◄/► to set Dialogue Enhancement
Level.
(3)Audio Description:Include Off and On.
(4)Audio Description Mixing Level:
Press OK and then use ◄/► to set Audio Description Mixing
Level.
(5)Audio Type: Include Normal,Hearing impaired and
Visual impaired
(6)Primary Preferred Language:
Press OK and then use ▲/▼ to select Primary Preferred
Language.
(7)Seconddary preferred language:
Press OK and then use ▲/▼ to select Sencond Preferred
Language.
Settings
Channels
Set up your TV to receive broadcast signal.
Digital Setup
Select to customise and receive digital broadcast services.