To Next PageTo Next Page
Need help?Do you have a question about the SANZUCO FTAN40A and is the answer not in the manual?
General| Model | FTAN40A |
|---|---|
| Category | Intercom System |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to 55°C |
| Humidity | 10% to 90% RH |
Enables one-to-one communication between rooms in a home or office.
Facilitates one-to-many communication for announcements or emergency calls.
Allows monitoring of children or elderly individuals in different rooms.
Enables hands-free, voice-activated communication without pressing buttons.
Provides an alert to other stations before initiating communication.
Switch for selecting communication codes (A, B, or C) to avoid interference.
Micro USB port for connecting power supply (5V) via USB cable and adaptor.
Functions as a voice monitor for rooms; requires same channel number.
Enables one-to-one communication by selecting the opposite number and holding TALK.
Facilitates one-to-many communication for announcements or emergency calls.
Allows hands-free communication; press MONITOR on both sides to activate.
Alerts other stations before talking; triggers ringing on receiver and transmitter.
Steps for powering on, charging, and setting unique channel numbers for each device.
How to select a unit and use the TALK button for private conversations.
Instructions for using the GROUP button for broadcast or group calls.
Steps to activate VOX mode for hands-free, voice-activated communication.
Guide on using the MONITOR button for listening to other rooms.
How to adjust the audio volume using the '+' and '-' buttons.
Explanation of how to change the ABC code to resolve interference issues.
Procedure for changing the default group number to avoid conflicts.
Instructions for setting a new channel number for intercom units.
Checks for power outlet, plug connection, and power cord integrity.
Tips to reduce interference, such as maintaining distance and lowering volume.
Troubleshooting steps for no voice or connection issues, checking group numbers.
Advice on avoiding extreme temperatures, impact, liquids, and high humidity.
Instructions for cleaning the unit with a soft cloth and mild detergent.
Avoid direct sunlight, heat sources above 140°F, and opening the unit.
Information on potential TV/radio interference and how to identify/eliminate it.
List of communication types forbidden on FRS/GMRS frequencies, e.g., commercial messages.
Requirements for antenna separation distance (at least 20 cm) from people.
