_English_
Stand Fan
SP-1760-B
INSTRUCTION MANUAL
SAFETY INSTRUCTIONS
1. Never put your fingers or other items into the cover to avoid any hurts.
2. Make sure to keep the fan far away from humidity, chemical articles and oil.
3. While cleaning, be sure not to splash water and do not use oil, alcohol or chemical articles
as they may cause distortion of fan body and cause electrical hazards.
4. Do not pull out the power supply plug by pulling power supply cord, which may lead to an
electrical shock.
5. Keep away from curtains, clothing or other items that may affect the fan’s work.
6. Turn off all switches and pull out the power supply plug when you go out for a long time.
7. Never use the fan before finishing assembly to avoid any hurts.
8. If the supply cord is damaged, it must be repaired or replaced by the manufacturer or its
service agent or a similarly qualified technician in order to avoid a hazard.
9. Before sending for maintaining, if the unit doesn’t work please check the plug of the power
supply has been inserted into socket with electricity.
10. Do not use the electric fan in rain.
PART IDENTIFICATION
A. Shroud ring
B. Front cover
C. Fastener for fan blade
D. Fan blade
E. Fastener for cover
F. Back cover
G. Output shaft
H. Joint
I. Back pane
J. Decorative cover
K. Up-down tube
L. External joint
M. Support tube
N. Decorative cover
O. Base
P. Motor
To Next Page
Need help?
General