Saramonic SmartRig II User Manual

User Manual
Product Structure
Specifications
Frequency Response
Noise
Maximum output level
Distortion
Phantom max current
Dimensions
Weight
20Hz to 20kHz (+/-1.5dB)
-98 dB full band, phantom power ON
2 Vrms
0.025% THD
13mA
L 88 x W 41 x H 42 mm
75g ( 2.57oz. )
SmartRig II
Audio Adapter
The SmartRig II from Saramonic is an easy solution
to connect professional microphones/guitars with
your iPhone, iPad, iPod touch and Android devices
PRODUCT INTRODUCTION
General Introductions
The SmartRig II from Saramonic is an easy solution to
connect professional microphones/guitars with your
iPhone, iPad, iPod touch and Android devices.
As a high-quality microphone preamp, SmartRig II allows
you to use professional stage microphones or high-end
studio microphones to create music with your iOS or
Android devices.
Simply plug the microphone into the standard XLR
connector of SmartRig II and connect it to your device with
the 3.5mm output cable.
The provided gain control thumbwheel makes it easy to set
precise levels. Processed sound can be monitored through
a 3.5mm headphone out.
Highlights
• Combo 1/4" (6.35mm) and XLR input
• Power/Phantom power provided by 9V battery
• +48V phantom power
• 3.5mm headphone output for monitoring
• +48V/OFF/ON switch
• Gain control
• Power/Phantom power provided by 9V battery

Saramonic SmartRig II Specifications

General

Type	Guitar microphone
RF power	13 mW
Volume control	Buttons
Microphone frequency	20 - 20000 Hz
Microphone sensitivity	-98 dB
Microphone Total Harmonic Distortion (THD)	0.025 %
XLR out	1
Microphone in	Yes
Device interface	6.35 mm (1/4\
Connectivity technology	Wired
Product color	Black
Number of products included	1 pc(s)

Weight and Dimensions

Depth	88 mm
Width	41 mm
Height	42 mm
Microphone weight	75 g